Genuine Leather Full Finger Motorcycle Riding Gloves | Lane ProMotor Skip to main content
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves
Genuine Leather Full Finger Motorcycle Riding Gloves

Genuine Leather Full Finger Motorcycle Riding Gloves

★★★★ 4.7 Trusted by riders worldwide
Checking availability...
$159.00
  • AFS18 black
  • AFS18 black white
  • AFS18 red white
  • AFS10 black
  • AFS10 white
  • L 21 cm (8.27in)
  • M 20 cm (7.87in)
  • XL 22 cm (8.66in)
  • XXL 23 cm (9.05in)
Please select
Please select
📏 Riders, please review the Size Guide in the product description before selecting your size.
Quantity
Estimated Delivery Australia & worldwide
Loading…
Tracking ID Via confirmation email
24–48 hrs
Rider Support Dedicated team
24/7
Secure Payment
PayPal Visa MasterCard American Express Shop Pay Apple Pay Google Pay UnionPay
SSL Encrypted · Safe Checkout · Buyer Protected
Genuine Leather · Full Finger Motorcycle Gloves · Leather / Polyester / Nylon / Shell · CE Certified · Unisex · S–2XL

Genuine Leather
Full Finger Motorcycle
Riding Gloves

CE Certified · Genuine Leather · Protective Shell · Windproof · Touchscreen · Non-Slip · All-Season

A multi-material construction built around a genuine leather outer — leather handles abrasion resistance and windproofing, polyester and nylon add structural flexibility at the finger joints and back of hand, and a hard protective shell covers the knuckle zone. CE certified, touchscreen-compatible fingertips, non-slip palm grip, and full finger enclosure across sizes S to 2XL for touring, motocross, and street use.

● CE Certified Genuine Leather Protective Shell Windproof Touchscreen Tips Non-Slip Grip Full Finger All-Season S – 2XL
CE
CE Certified
Genuine Leather
Windproof
Touchscreen Tips
Protective Shell
Full Finger
All-Season
Non-Slip Grip
Material & Feature Performance
🧤
Multi-Material Shell Logic
Each material is assigned to the zone where its properties are most useful: genuine leather covers the palm and high-abrasion surfaces where slide contact occurs; polyester panels sit at the back of the hand and finger channels where flexibility matters more than abrasion resistance; nylon reinforces stress points at seams and finger crotches; the hard protective shell sits over the knuckle zone where rigid impact deflection is needed. No single material performs all four functions well enough to be used alone.
💨
Windproof Leather Construction
Genuine leather's natural fibre density blocks wind penetration without requiring a sealed membrane. At highway speed, wind pressure through an unprotected fabric glove causes rapid convective heat loss at the hand — the same mechanism that makes fingers numb in open-face gloves in cold weather. Leather windproofing is inherent to the material and does not degrade with use the way treated synthetics can.
🛡️
Hard Protective Shell
The rigid shell over the knuckle zone deflects impact force across its surface rather than concentrating it at a single point of contact. In a fall, the knuckle area contacts road surface early — a hard shell allows the hand to slide rather than grip, reducing the torque on finger joints that causes ligament damage in unprotected or soft-padded gloves.
📱
Touchscreen-Compatible Fingertips
Conductive material at the index and thumb fingertips completes the capacitive circuit needed for screen response without removing the glove. These two digits handle the majority of touchscreen inputs — navigation zoom, call acceptance, and tap selections. The remaining fingers and palm use standard leather, preventing accidental inputs from handlebar grip contact.
🤝
Non-Slip Palm Grip
Textured or rubberised grip material on the palm increases friction coefficient between the glove and handlebar grip. The non-slip zones maintain throttle and brake control when the palm surface becomes damp from sweat or light rain — conditions where smooth leather alone can rotate on the bar under braking force, particularly during sustained heavy deceleration.
🏅
CE Certification
CE certification for motorcycle gloves tests the complete assembly — abrasion resistance at the palm zone, cut resistance, and retention system security under a defined pull force. Certification applies to this specific glove construction; substituting components or making aftermarket modifications invalidates the certificate even if each part individually meets CE standards.
Key Highlights
No. 1
All-Season — What It Means Here
The all-season rating reflects the windproof leather outer's capability to keep hands protected year-round. There is no thermal insulation layer in this construction — the gloves are comfortable in cool conditions where the windproof outer prevents convective heat loss, but below approximately 5°C a separate thermal liner or heated solution is needed. In summer, the polyester and nylon panels allow sufficient airflow to keep the hand comfortable above 20°C.
No. 2
Motocross vs Touring Use
For motocross, the protective shell and full finger enclosure are the priority features — off-road falls are more frequent at lower speeds, and the shell deflects branch, stone, and handlebar impact. For touring, the windproof leather and non-slip palm carry more weight — sustained highway riding creates continuous wind and vibration load rather than acute impact events. The glove construction addresses both applications, but confirms which feature set matches your primary riding style before sizing.
No. 3
Palm Width vs Circumference — Use Both
The chart provides two measurements because hand shape varies independently of hand size. Palm width (across the back of the hand) and palm circumference (around the palm excluding thumb) can place the same rider in different size columns. If the two measurements conflict, choose the larger size — a glove that is slightly loose at the palm can be managed with wrist closure adjustment; a glove tight across the knuckle zone restricts blood flow and reduces dexterity at the lever.
No. 4
Leather Maintenance for All-Season Use
Genuine leather used across all seasons is exposed to rain, road salt, sweat, and UV — all of which degrade the fibre structure if not addressed. Apply a leather conditioner every 4–6 weeks during regular use. After riding in rain, allow the gloves to dry naturally at room temperature — direct heat sources (radiators, hair dryers) accelerate fibre drying and cause permanent stiffening that reduces the leather's flexibility and grip sensitivity at the lever.
No. 5
Size Chart Uses Single-Point Measurements
Each size in the chart specifies a single measurement point per dimension — S is exactly 7.5cm width / 19cm circumference, M is 8.0cm / 20cm, and so on. There are no ranges between sizes. If your measurement falls between two listed values (for example, 8.2cm width), you are between M and L — choose L. Measuring three times and using the largest reading reduces the chance of a boundary error causing an undersized order.
No. 6
Protective Shell Inspection After Impact
Hard shells on motorcycle gloves can crack internally from a significant impact without visible surface damage — the rigid material distributes force but absorbs it through fracture at the molecular level. After any fall or direct high-force contact at the knuckle zone, apply firm pressure to the shell and flex it gently. If it flexes where it was previously rigid, or produces a crackling sound, the shell has structurally failed and the glove should be replaced before the next ride.
Construction Zone Detail
01
Genuine Leather Palm Zone
The leather palm panel runs from the heel of the hand across the inner fingers — the surface in direct contact with the brake lever, clutch, and throttle throughout every ride. Leather at this zone preserves tactile feedback better than synthetic alternatives at equivalent abrasion resistance, allowing the rider to feel lever position and pressure modulation through the material.
02
Polyester + Nylon Flex Panels
Polyester and nylon panels at the dorsal hand and finger channel zones allow the glove to flex with the natural curvature of the grip without resistance. Stiff materials at these zones force the hand to work against the glove when gripping the handlebar — increasing forearm fatigue on long rides before any protective benefit is realised.
03
Hard Protective Shell Zone
The shell covers the metacarpal knuckle line — the zone that contacts the road first in a forward outstretched-arm fall. Its rigid surface allows the hand to slide over the road rather than grip, reducing the rotational torque on finger joints that causes ligament tearing in gloves without hard exterior surfaces at this critical zone.
04
Full Finger Enclosure
Each finger is enclosed individually from tip to base — the full-finger design keeps leather in contact with road surface across the complete finger, not just the palm and knuckle. In half-finger or cut-finger designs, the exposed proximal and middle finger zones contact tarmac directly, causing abrasion injuries that full-finger construction prevents regardless of fall angle.
05
Non-Slip Palm Surface
Grip material is bonded to the leather at the lower palm and inner finger pads — the primary handlebar contact zone. The bond between grip material and leather is the durability-limiting component: inspect the grip pad edges periodically for lifting or delamination, which reduces wet-surface grip performance before it is visually obvious on a dry bar.
06
Touchscreen Fingertip Material
Conductive thread or material is integrated at the index and thumb fingertip panels. Repeated flexion at the fingertip fatigues the conductive thread over time — if touchscreen response becomes inconsistent at one finger while the glove otherwise functions normally, the thread at that fingertip has likely fractured. This is a wear item; replace the gloves if screen compatibility is operationally required and performance has degraded.
Key Attributes
Material
Leather / Poly / Nylon
Certification
CE Certified
Season
All-Season
Protection
Hard Shell
Size Range
S – 2XL
Gender
Unisex
  • Measure palm width AND circumference — the chart uses single points, not ranges: S = 7.5cm / 19cm, M = 8.0cm / 20cm, L = 8.5cm / 21cm, XL = 9.0cm / 22cm, 2XL = 9.5cm / 23cm. If your measurement falls between two values, you are between sizes — go up. If width and circumference suggest different sizes, choose the larger of the two.
  • No thermal lining — plan accordingly below 5°C: These gloves are windproof but uninsulated. The leather outer prevents convective heat loss effectively in cool conditions, but below approximately 5°C the hand will require supplementary warmth. A thin thermal inner glove worn underneath is compatible with the full-finger construction without compressing the sizing.
  • Condition the leather every 4–6 weeks: All-season leather exposure to rain and road salt requires regular conditioning to prevent fibre drying and stiffening. Use a leather conditioner without silicone — silicone coats the fibre surface without nourishing it, blocking the leather's natural breathability and reducing grip sensitivity at the lever over time. Dry naturally after wet rides; never use direct heat.
  • Inspect the protective shell after any fall: Press the shell firmly and flex it gently after any direct knuckle impact — crackling or unexpected flexion indicates internal fracture. A visually intact shell that has internally failed provides no deflection protection in a subsequent fall. Replace before riding again if any structural change is detected.
Size Guide

Palm width — measure straight across the widest part of the back of the hand.

Palm circumference — measure around the palm excluding the thumb. Each size uses a single measurement point; if you fall between sizes, choose the larger.

Size Palm Width Palm Circumference
S 7.5 cm (2.95") 19 cm (7.48")
M 8.0 cm (3.15") 20 cm (7.87")
L 8.5 cm (3.34") 21 cm (8.27")
XL 9.0 cm (3.54") 22 cm (8.66")
2XL 9.5 cm (3.74") 23 cm (9.05")

* Each size is a single measurement point, not a range. If between sizes or if width and circumference suggest different sizes, choose the larger. Measure three times and use the largest reading.

Product Specifications
TypeFull Finger Motorcycle Riding Gloves
MaterialsGenuine Leather / Polyester / Nylon / Hard Protective Shell
CertificationCE Certified
FeaturesWindproof / Touchscreen Tips / Non-Slip Grip / Hard Shell Protection
SeasonAll-Season (Windproof — No Thermal Lining)
GenderUnisex
ApplicationMotorcycle Touring / Motocross / Street / Outdoor Sports
Size RangeS, M, L, XL, 2XL
OriginMainland China
ConditionBrand New
Package Includes
🧤1 × Pair Genuine Leather Full Finger Motorcycle Gloves
📦Secure Protective Packaging

Genuine Leather Full Finger Motorcycle Gloves — CE certified, multi-material, all-season. Leather palm, polyester and nylon flex panels, hard protective shell at the knuckle, windproof outer, touchscreen fingertips, and non-slip grip across sizes S to 2XL.

Buy Now ↗

FAQ

Many of our items meet the CE AAA standard—the highest level of safety certification for motorcycle apparel. Whether you’re cruising the streets, hitting the track, or powering through off-road terrain, Lane ProMotor gear is built to perform wherever the ride leads.

Once your order is on its way, you’ll receive your tracking number by email within 2–3 business days. Enter it on our Track Your Order page for live delivery updates. If it hasn’t come through after a week, check your spam or let us know and we’ll resend it.

Feel free to email us anytime at info@lanepromotor.com. Our support team is available Monday–Friday from 09:00 to 17:00 (Perth time, GMT+8). We aim to respond within 24 hours, excluding weekends and public holidays.

Please notify us immediately so we can correct the address before your order is dispatched. If the parcel is returned to us, a restocking or reshipment fee may apply. Be sure to double-check your address at checkout to avoid any delays.

All our gear is brand-new, in excellent, unworn condition. While minor storage marks may occasionally occur, every item is thoroughly inspected before we ship it out. Lane ProMotor delivers motorcycle equipment that won’t fade, crack or give in. From gloves and helmets to vests, pants, and custom race suits, each product is engineered to handle impact and endure tough riding conditions.

 

 

Returns & Exchanges Policy

At Lane ProMotor™, we are committed to providing riders with premium motorcycle gear, apparel, and accessories backed by excellent customer service. We understand that sometimes things do not work out, which is why we aim to make the return and exchange process as simple and hassle-free as possible.

30-Day Free Return Policy

Lane ProMotor™ offers a 30-day return policy, allowing you to request a return within 30 days of receiving your item.

To be eligible for a return, your item must:

  • Be unworn, unused, and in original condition
  • Include all original tags and packaging
  • Be accompanied by proof of purchase or order confirmation

To start a return, please contact us at 📧 info@lanepromotor.com.

Once your return request is approved, we will provide return instructions and the appropriate return address. Returns sent without prior approval will not be accepted.

How To Initiate A Return Or Exchange

To request a return or exchange, please follow these steps:

  • Contact our support team at info@lanepromotor.com
  • Provide your order number and reason for the return or exchange
  • Wait for approval and return instructions
  • Securely package your item in its original packaging
  • Ship the item according to the provided instructions

Please ensure your order number is included inside the parcel to avoid delays.

Damages & Issues

Please inspect your order immediately upon delivery.

If your item arrives damaged, defective, incorrect, or missing parts, please contact us as soon as possible at info@lanepromotor.com with:

  • Your order number
  • Photos of the item and packaging
  • A brief explanation of the issue

We will review the matter promptly and work to provide an appropriate resolution.

Exceptions / Non-Returnable Items

The following items are not eligible for return or exchange:

  • Sale or clearance items
  • Gift cards
  • Custom or personalised products
  • Perishable goods
  • Personal care products
  • Hazardous materials
  • Final sale items

If you are unsure whether your item qualifies for a return, please contact us before sending it back.

Return Shipping Costs

Domestic Returns (Australia)
Customers are responsible for return shipping costs unless the item arrived damaged, defective, or incorrect.

International Returns
International customers are responsible for all return shipping costs, customs duties, taxes, and associated return fees.

Exchanges
If an exchange is approved due to a sizing issue, damaged item, or incorrect product, Lane ProMotor™ may cover the shipping cost for sending the replacement item depending on the circumstance.

Exchanges

Need a different size, colour, or product?

The fastest way to receive a replacement item is to:

  • Submit a return request for the original item
  • Return the approved item
  • Place a new order for your preferred replacement product

If you require assistance with sizing or exchanges, our support team is happy to help.

Refunds

Once we receive and inspect your returned item, we will notify you regarding the approval status of your refund.

If approved:

  • Refunds will be issued to your original payment method
  • Processing generally takes 5–7 business days
  • Your bank or payment provider may require an additional 24–48 hours to process the refund

If more than 15 business days have passed since your refund was approved, please contact us at info@lanepromotor.com.

European Union – 14-Day Cooling-Off Period

For customers located in the European Union, you have the right to cancel or return your order within 14 days for any reason and without justification.

To qualify:

  • Items must be unused and in original condition
  • All tags and packaging must be included
  • Proof of purchase is required

Frequently Asked Questions (FAQ)

How long does it take to process my return?
Returns are usually processed within 5–7 business days after the returned item has been received and inspected.

Can sale items be returned?
Sale and clearance items are generally final sale unless faulty under applicable consumer laws.

Can I exchange for another size?
Yes. Please contact our support team before returning your item so we can assist you with the exchange process.

What if I entered the wrong shipping address?
Please contact us immediately. Once an order has been dispatched, address changes may no longer be possible.

Do you provide prepaid return labels?
Prepaid return labels may be provided for approved eligible returns depending on the situation.

Need Help?

If you have any questions regarding your order, return, exchange, or refund, please contact our support team:

📧 info@lanepromotor.com

Business Hours:
Monday – Friday, 9:00am – 5:00pm AWST

Lane ProMotor™ Support Team

 

 

Yes, we offer exchanges for unworn items that still have their original tags and packaging. Simply email us at info@lanepromotor.com and let us know which size or style you’d like.

Recently viewed

Your Cart

Your cart is currently empty.
Click here to continue shopping.