LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants | Lane ProMotor Skip to main content
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants
LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants

LYSCHY LY-2019 CE Level 2 Quick-Release Winter Riding Pants

★★★★ 4.7 Trusted by riders worldwide
Checking availability...
$179.00
$209.00
  • Black
  • M(94)
  • L(98)
  • XL(102)
  • XXL(106)
  • 3 XL(110)
  • 5 XL(118)
Please select
Please select
📏 Riders, please review the Size Guide in the product description before selecting your size.
Quantity
Estimated Delivery Australia & worldwide
Loading…
Tracking ID Via confirmation email
24–48 hrs
Rider Support Dedicated team
24/7
Secure Payment
PayPal Visa MasterCard American Express Shop Pay Apple Pay Google Pay UnionPay
SSL Encrypted · Safe Checkout · Buyer Protected
LYSCHY / Thunder Wings · LY-2019 · 600D Oxford · 6000mm Waterproof · 180g Thermal · CE Level 2 · M–5XL

LYSCHY LY-2019
CE Level 2 Quick-Release
Winter Riding Pants

CE Level 2 · 6000mm Waterproof · 600D Oxford · 180g Thermal · Full Side Zippers · Reflective

The LY-2019 is built around three features that separate it from standard riding pants: full-length side zippers that open both legs completely for on/off without removing boots, a 6000mm waterproof rating across the built-in membrane, and a 180g thickened cotton thermal lining that goes beyond the thin liners typically found at this price point. CE Level 2 knee and hip protectors — testing to half the force-transmission ceiling of Level 1 — are included across sizes M to 5XL.

● CE Level 2 Full Side Zippers 6000mm Waterproof 600D Oxford Shell 180g Thermal Lining Windproof Anti-UV + Flame-Retardant Reflective M – 5XL
LYSCHY / Thunder Wings
Model LY-2019  ·  M–5XL  ·  600D Oxford + 6000mm Waterproof
LEVEL-2
CE CERTIFIED
LVL-2 CE
CE Level 2
Quick Release Zipper
Waterproof 6000mm
Windproof
180g
180g Thermal
600D
600D Oxford Shell
Anti-UV Flame-Retardant
Reflective at Night
Layer Construction
Three-Layer Stack
Outer shell — 600D Oxford cloth: 600 denier Oxford weave with water-repellent surface treatment. The 600D specification indicates thick individual filaments — a heavier, more abrasion-resistant weave than the 300D or 420D fabrics used in lighter riding trousers. The water-repellent surface treatment causes rain to bead on dry fabric; the built-in waterproof layer below handles sustained rain ingress.
Built-in waterproof membrane — 6000mm rating: A waterproof layer bonded into the trouser construction — not removable. 6000mm hydrostatic head means the membrane withstands a 6-metre water column before the first drop penetrates, providing a substantial margin above the 1500mm pressure generated by sustained highway rain. Unlike DWR-only shells, this membrane maintains waterproof performance even when the outer fabric is fully saturated.
Inner thermal lining — 180g cotton fill: 180g fill weight is considerably heavier than the 80–100g linings found in standard winter riding trousers — the additional fill depth provides meaningful insulation for temperatures below 5°C. Cotton fill retains warmth in dry conditions; in very cold and wet conditions where sustained heat loss is a factor, a thin moisture-wicking base layer beneath the pants supplements the cotton's thermal performance.
Full-length side zippers: Both legs open completely from hip to ankle along the outer seam — allowing the pants to be pulled on and off over boots, over jeans or thermal base layers, and without sitting down or balancing on one foot. The zipper runs the full side seam length; partial-opening zippers found on some riding trousers require boot removal. Confirm the zip pull is accessible with gloves on before departure.
Feature Performance
🏅
CE Level 2 — The Force-Transmission Standard
CE Level 2 under EN 1621-1 limits protector force transmission to 20 kN maximum at the test impact energy — Level 1's ceiling is 35 kN. The same impact event transmits significantly less force through the body when a Level 2 protector is correctly positioned. Both certifications require independent pre-market laboratory testing; Level 2 is not self-certified and cannot be achieved by the manufacturer declaring compliance.
Full Side Zippers — On/Off Without Boot Removal
The full-length side zipper system serves two practical functions: rapid on/off at a petrol stop or layover without removing boots or gear, and the ability to pull the LY-2019 directly over jeans or thermal trousers for cold-start layering. Partial side zippers on competing trousers typically open 20–30cm at the ankle — sufficient for boot clearance only, not for pulling the pants over existing clothing.
💧
6000mm Built-In Membrane
The 6000mm waterproof layer is built into the trouser permanently — it is not removable for warm-weather use. In summer this adds unnecessary warmth inside the trouser; the LY-2019's design is optimised for cold and wet conditions rather than all-season versatility. The waterproof membrane sits between the Oxford outer and the thermal lining — both surfaces it contacts are soft and will not abrade the membrane under normal use.
🔥
Anti-UV + Flame-Retardant Outer
The 600D Oxford shell carries both UV-blocking compounds and flame-retardant treatment. Anti-UV compounds in the weave intercept ultraviolet radiation before it reaches the skin on open-road touring routes. The flame-retardant treatment inhibits ignition from exhaust contact or engine proximity — both treatments are bonded to the outer layer's fibre surface and are the zone most exposed to sun and heat sources during riding.
🔆
Reflective Elements for Night Visibility
Retroreflective panels at the lower leg return vehicle headlight beams toward the source — making the rider's leg outline visible to approaching drivers at distances where dark clothing is otherwise invisible. The lower leg position benefits from constant movement during riding, which increases retroreflective conspicuity compared to static upper-body panels. Inspect reflective material periodically; heat washing and abrasion degrade the retroreflective layer's brightness over time.
📐
Dual Waist Measurement — Stretch vs Waistline
The size chart provides both a waistline measurement (the natural unstretched waist the pants are cut for) and a waist stretch measurement (the maximum the elastic waistband can accommodate). This matters for riders who wear additional base layers in winter — the stretch column shows whether the waistband can accommodate the extra bulk. If your natural waist falls between the two columns for your hip size, the pants will fit with room to spare.
Key Highlights
No. 1
Full-Side Zip vs Partial Ankle Zip
Most riding trousers with "side zippers" open 20–30cm at the ankle to clear the boot shaft — they do not allow the trouser to be pulled on over boots or layered clothing. The LY-2019's zippers run the full outer side seam from hip to ankle, opening both legs completely. For winter commuters who need to pull the pants on over work trousers at a stop, or for touring riders who want to layer over thermal base layers without changing, this is the functional difference that makes the full-zip design worth specifying.
No. 2
180g Thermal — How It Compares
Standard winter riding trousers typically use 80–100g thermal linings. 180g is approximately double the fill density — the additional cotton fill depth provides meaningful warmth down to approximately 0°C to −5°C in riding conditions where windchill accelerates heat loss. Below this range a thermal base layer beneath the pants is recommended; above 10°C the 180g fill creates excess warmth and the pants become over-specified for the conditions.
No. 3
Built-In Membrane — Not Removable
Unlike the CE Riding Pants (which has a removable 4000mm waterproof layer for warm-weather use), the LY-2019's 6000mm membrane is permanently built into the trouser construction. In temperatures above 15°C the combination of the permanent membrane and 180g thermal lining makes these pants too warm for comfortable riding. The LY-2019 is designed specifically for cold and wet conditions — autumn, winter, and early spring — not as a year-round trouser.
No. 4
Side Length vs Inseam — What the Chart Shows
The size chart provides a side length measurement (outer seam from waist to ankle) rather than an inseam. Side length runs from 108cm (M) to 118cm (5XL). To compare with your inside leg: side length is typically 25–30cm longer than inseam for a given person, so a rider with a 78cm inseam would expect a side length of approximately 103–108cm — aligning with M at the bottom of the side length range. Measure your own side length (hip bone to floor) and match directly against the chart column.
No. 5
CE Level 2 — Protector Alignment in Riding Posture
CE Level 2's lower force-transmission ceiling only protects the anatomy the protector actually covers. Sit on the motorcycle after first fitting and confirm the knee pad is centred over the patella and the hip pad covers the greater trochanter (outer hip prominence, approximately 10–15cm below the waistband). If the protectors are misaligned, adjust the waistband height until both pockets sit over their intended zones — the higher Level 2 standard provides no additional benefit if the pad is covering the shin or the iliac crest.
No. 6
Zipper Maintenance in Winter Use
Full-length metal zippers on motorcycle trousers operate in road salt, grit, and ice during winter riding — conditions that accelerate corrosion and grit ingress that causes binding. Apply a zipper lubricant (wax-based or PTFE spray) to both side zippers before the winter riding season and every 4–6 weeks during sustained use. A zipper that binds mid-leg in cold weather with gloves on cannot be forced open without risk of damaging the slider or the trouser seam alongside it.
Construction Zone Detail
01
600D Oxford Outer — Abrasion Zones
600D Oxford cloth is heavier and stiffer than lighter riding fabrics, which concentrates wear resistance at the outer surface where road contact, footpeg abrasion, and saddle movement act continuously. The inner thigh seam and the rear seat panel are the highest-wear zones in daily use — inspect these areas periodically for thinning or fraying that indicates the Oxford weave is being progressively abraded from the inside of these high-friction surfaces.
02
Waterproof Membrane Integrity
The built-in membrane is permanently bonded between the Oxford outer and the thermal lining — it cannot be inspected visually. If water ingress occurs inside the trouser during rain riding, the membrane has either been mechanically compromised (a puncture or cut through all layers) or the seam stitching above it allows wicking through needle holes. Machine washing cold on a gentle cycle preserves the membrane's bonding; high-temperature washing and tumble drying at high heat accelerate delamination.
03
180g Cotton Lining — Storage and Washing
Cotton fill at 180g is susceptible to matting under sustained compression — storing the pants folded tightly or under heavy objects over extended periods can flatten the fill and reduce effective insulation thickness. Hang or store loosely. Wash cold, gentle cycle only; cotton fill loses dimensional loft when machine washed at high temperature. Air dry or tumble dry on low — high heat causes cotton fill to shrink and clump, creating uneven insulation across the lining.
04
CE Level 2 Knee Pocket
The knee pocket must hold the Level 2 protector over the patella across the full knee flex range from standing to riding crouch. Level 2 protectors are thicker than Level 1 at equivalent coverage — confirm the pocket depth accommodates the included pad without the pad protruding against the Oxford outer, which creates a pressure point that transfers to the knee during extended riding. If the protector does not sit flush, the pocket is undersized for the included pad thickness.
05
Full-Side Zipper Seal at Waist
Where the side zipper terminates at the waistband, the zip fastening point is the primary ingress point for wind and rain entering the leg from the hip zone. Confirm both zippers are fully closed and their top stops are sealed before riding in rain or cold wind. A partially closed zip at the upper termination allows cold air to channel down the inside of the Oxford outer alongside the thermal lining — bypassing both the membrane and the fill in that leg's upper section.
06
Hip Protector Pocket Position
The hip pocket covers the greater trochanter — the lateral hip prominence at the outer upper femur that contacts the ground first in a lateral slide. Confirm the pocket sits over this zone when the pants are at their correct wearing height; a pocket positioned at the iliac crest (waistband level) or mid-buttock protects the wrong anatomical zone. Adjust waistband height until the hip pocket aligns with the trochanter before the first ride — both protector zones scale with waistband position simultaneously.
Key Attributes
Protection
CE Level 2
Waterproof
6000mm Built-In
Outer Shell
600D Oxford
Thermal Fill
180g Cotton
Size Range
M – 5XL
Quick Release
Full Side Zips
  • Use the side length column — not inseam — for length sizing: The chart shows side length (outer seam, hip to ankle): 108cm (M) to 118cm (5XL). Measure your own side length from hip bone to floor. If waist, hip, and side length suggest different sizes, prioritise hip for protector pocket alignment, then confirm side length is within 2–3cm of your measurement. 1–3cm length variance is noted in the manual measurement disclaimer.
  • Size to hip — check both waist columns for base-layer fit: The chart provides both a natural waistline and a stretch waist. If you plan to wear a thermal base layer beneath the LY-2019, use the stretch column to confirm the waistband can accommodate the combined bulk. If hip and waistline suggest different sizes, choose hip — protector pocket position is governed by hip measurement, not waist.
  • Lubricate the side zippers before winter use and every 4–6 weeks: Full-length zippers operating in road salt and grit bind progressively without lubrication. Apply wax-based zipper lubricant or PTFE spray to both side zippers before the season and at regular intervals during sustained winter use. A zipper that binds mid-leg in cold conditions with gloves on cannot be safely forced without damaging the slider — preventative lubrication costs seconds and prevents a disabling field failure.
  • Confirm protector position in riding posture before the first ride: CE Level 2's half-force-transmission standard only applies at the anatomical zone the protector covers. Sit on the motorcycle and confirm the knee pad is centred over the kneecap and the hip pad covers the outer hip prominence. Adjust waistband height until both align — both pockets move together with the pants, so one adjustment corrects both zones simultaneously.
Size Guide

Provide height, weight, waist, and hip measurements when ordering. Two waist measurements are provided — natural waistline and maximum elastic stretch. If sizing for use with a base layer, use the stretch column. Priority sizing axis is hip. Side length is the outer seam measurement; measure from hip bone to floor and match directly. Allow 1–3cm measurement variance.

Measurement M L XL 2XL 3XL 4XL 5XL
Waist Stretch (cm) 94 98 102 106 110 114 118
Waistline (cm) 88 92 96 100 104 108 112
Hips (cm) 112 116 120 124 128 132 136
Side Length (cm) 108 109.5 111 113 115 117 118

* Flat manual measurements — allow 1–3cm variance. Side length is outer seam hip-to-ankle; compare against your own hip-to-floor measurement. Size to hip; use stretch waist column when ordering for use with thermal base layers.

Product Specifications
BrandLYSCHY / Thunder Wings
ModelLY-2019
TypeMotorcycle Riding Pants
Outer Shell600D Oxford Cloth — Water-Repellent Surface Treatment
Waterproof6000mm Built-In Membrane (Permanent — Not Removable)
Thermal Lining180g Thickened Cotton Fill
ProtectionCE Level 2 Knee + Hip Protectors × 2 each (Removable, Included)
Zipper SystemFull-Length Side Zippers — Both Legs, Hip to Ankle
FeaturesWindproof / Anti-UV / Flame-Retardant / Reflective
FitComfort Fit
SeasonAutumn / Winter / Spring (Optimised for Cold and Wet)
GenderMen / Unisex
Size RangeM, L, XL, 2XL, 3XL, 4XL, 5XL
ConditionBrand New
Package Includes
👖1 × LYSCHY LY-2019 Riding Pants
🛡️CE Level 2 Knee Protectors × 2
🛡️CE Level 2 Hip Protectors × 2

LYSCHY LY-2019 — CE Level 2 quick-release winter riding pants, M to 5XL. 600D Oxford outer, 6000mm built-in waterproof membrane, 180g cotton thermal lining, full-length side zippers on both legs, anti-UV and flame-retardant shell, reflective details, and CE Level 2 knee and hip protectors included.

Buy Now ↗

FAQ

Many of our items meet the CE AAA standard—the highest level of safety certification for motorcycle apparel. Whether you’re cruising the streets, hitting the track, or powering through off-road terrain, Lane ProMotor gear is built to perform wherever the ride leads.

Once your order is on its way, you’ll receive your tracking number by email within 2–3 business days. Enter it on our Track Your Order page for live delivery updates. If it hasn’t come through after a week, check your spam or let us know and we’ll resend it.

Feel free to email us anytime at info@lanepromotor.com. Our support team is available Monday–Friday from 09:00 to 17:00 (Perth time, GMT+8). We aim to respond within 24 hours, excluding weekends and public holidays.

Please notify us immediately so we can correct the address before your order is dispatched. If the parcel is returned to us, a restocking or reshipment fee may apply. Be sure to double-check your address at checkout to avoid any delays.

All our gear is brand-new, in excellent, unworn condition. While minor storage marks may occasionally occur, every item is thoroughly inspected before we ship it out. Lane ProMotor delivers motorcycle equipment that won’t fade, crack or give in. From gloves and helmets to vests, pants, and custom race suits, each product is engineered to handle impact and endure tough riding conditions.

 

 

Returns & Exchanges Policy

At Lane ProMotor™, we are committed to providing riders with premium motorcycle gear, apparel, and accessories backed by excellent customer service. We understand that sometimes things do not work out, which is why we aim to make the return and exchange process as simple and hassle-free as possible.

30-Day Free Return Policy

Lane ProMotor™ offers a 30-day return policy, allowing you to request a return within 30 days of receiving your item.

To be eligible for a return, your item must:

  • Be unworn, unused, and in original condition
  • Include all original tags and packaging
  • Be accompanied by proof of purchase or order confirmation

To start a return, please contact us at 📧 info@lanepromotor.com.

Once your return request is approved, we will provide return instructions and the appropriate return address. Returns sent without prior approval will not be accepted.

How To Initiate A Return Or Exchange

To request a return or exchange, please follow these steps:

  • Contact our support team at info@lanepromotor.com
  • Provide your order number and reason for the return or exchange
  • Wait for approval and return instructions
  • Securely package your item in its original packaging
  • Ship the item according to the provided instructions

Please ensure your order number is included inside the parcel to avoid delays.

Damages & Issues

Please inspect your order immediately upon delivery.

If your item arrives damaged, defective, incorrect, or missing parts, please contact us as soon as possible at info@lanepromotor.com with:

  • Your order number
  • Photos of the item and packaging
  • A brief explanation of the issue

We will review the matter promptly and work to provide an appropriate resolution.

Exceptions / Non-Returnable Items

The following items are not eligible for return or exchange:

  • Sale or clearance items
  • Gift cards
  • Custom or personalised products
  • Perishable goods
  • Personal care products
  • Hazardous materials
  • Final sale items

If you are unsure whether your item qualifies for a return, please contact us before sending it back.

Return Shipping Costs

Domestic Returns (Australia)
Customers are responsible for return shipping costs unless the item arrived damaged, defective, or incorrect.

International Returns
International customers are responsible for all return shipping costs, customs duties, taxes, and associated return fees.

Exchanges
If an exchange is approved due to a sizing issue, damaged item, or incorrect product, Lane ProMotor™ may cover the shipping cost for sending the replacement item depending on the circumstance.

Exchanges

Need a different size, colour, or product?

The fastest way to receive a replacement item is to:

  • Submit a return request for the original item
  • Return the approved item
  • Place a new order for your preferred replacement product

If you require assistance with sizing or exchanges, our support team is happy to help.

Refunds

Once we receive and inspect your returned item, we will notify you regarding the approval status of your refund.

If approved:

  • Refunds will be issued to your original payment method
  • Processing generally takes 5–7 business days
  • Your bank or payment provider may require an additional 24–48 hours to process the refund

If more than 15 business days have passed since your refund was approved, please contact us at info@lanepromotor.com.

European Union – 14-Day Cooling-Off Period

For customers located in the European Union, you have the right to cancel or return your order within 14 days for any reason and without justification.

To qualify:

  • Items must be unused and in original condition
  • All tags and packaging must be included
  • Proof of purchase is required

Frequently Asked Questions (FAQ)

How long does it take to process my return?
Returns are usually processed within 5–7 business days after the returned item has been received and inspected.

Can sale items be returned?
Sale and clearance items are generally final sale unless faulty under applicable consumer laws.

Can I exchange for another size?
Yes. Please contact our support team before returning your item so we can assist you with the exchange process.

What if I entered the wrong shipping address?
Please contact us immediately. Once an order has been dispatched, address changes may no longer be possible.

Do you provide prepaid return labels?
Prepaid return labels may be provided for approved eligible returns depending on the situation.

Need Help?

If you have any questions regarding your order, return, exchange, or refund, please contact our support team:

📧 info@lanepromotor.com

Business Hours:
Monday – Friday, 9:00am – 5:00pm AWST

Lane ProMotor™ Support Team

 

 

Yes, we offer exchanges for unworn items that still have their original tags and packaging. Simply email us at info@lanepromotor.com and let us know which size or style you’d like.

Recently viewed

Your Cart

Your cart is currently empty.
Click here to continue shopping.