VEMAR VJ-036 Summer Breathable Motorcycle Jacket | Lane ProMotor Skip to main content
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket
VEMAR VJ-036 Summer Breathable Motorcycle Jacket

VEMAR VJ-036 Summer Breathable Motorcycle Jacket

★★★★ 4.7 Trusted by riders worldwide
Checking availability...
$179.00
$239.95
  • Black
  • Gray
  • S(109cm)
  • M(113cm)
  • L(117cm)
  • 2 XL(125cm)
  • 3 XL(129cm)
  • 4 XL(133cm)
Please select
Please select
📏 Riders, please review the Size Guide in the product description before selecting your size.
Quantity
Estimated Delivery Australia & worldwide
Loading…
Tracking ID Via confirmation email
24–48 hrs
Rider Support Dedicated team
24/7
Secure Payment
PayPal Visa MasterCard American Express Shop Pay Apple Pay Google Pay UnionPay
SSL Encrypted · Safe Checkout · Buyer Protected
VEMAR · VJ-035 (Black) / VJ-036 (Gray) · Oxford + Polyester Mesh · 5-Piece CE Armor · Cordura · 1.1kg · S–4XL

VEMAR VJ-036
Summer Breathable
Motorcycle Jacket

CE Shoulder + Elbow (×4) · EVA Back · Oxford + Mesh · Cordura · Full-Body Reflective · Asian Sizing · S–4XL

The VJ-036 is VEMAR's summer motorcycle jacket sold in two colour variants: VJ-035 (Black) and VJ-036 (Gray) — same jacket, different model codes. Shell is Cordura-reinforced Oxford cloth at structural zones and polyester mesh at ventilation panels. Five pads included: CE-certified shoulder ×2 and elbow ×2 (CE level not stated), plus an EVA foam back pad (non-CE). Full-body reflective on sleeves, front, and back. Asian sizing — size up from your usual Western size. 1.1kg jacket weight, S to 4XL.

● VJ-035 Black / VJ-036 Gray — Same Jacket CE Shoulder + Elbow ×4 EVA Back Pad (Non-CE) Oxford + Mesh + Cordura Full-Body Reflective Asian Sizing — Size Up CE Level — Confirm with Seller 1.1 kg · S–4XL
Key Attributes
Shell
Oxford + Polyester Mesh (Cordura)
CE Armor
Shoulder ×2 + Elbow ×2 (CE level — confirm)
Back Pad
EVA Foam — Not CE Certified
Colours
VJ-035 Black · VJ-036 Gray
Weight
1.1 kg
Size Range
S – 4XL (Asian — size up)
  • VJ-035 and VJ-036 are the same jacket in different colours — not different models: The specs list two model numbers: VJ-035 (Black) and VJ-036 (Gray). The size chart header also lists "VJ-035 / VJ-036" together. Both use identical construction, materials, and padding. If you want Black, order VJ-035; if you want Gray, order VJ-036. The product description and all specifications apply equally to both.
  • EVA back pad is not CE certified — CE applies only to shoulder and elbow pads: The protection callout explicitly separates the back pad from the CE-certified items: "CE-certified shoulder ×2 + CE-certified elbow ×2 + EVA foam back." EVA is a closed-cell foam that provides impact cushioning but has not been independently tested to EN 1621-2 (the CE standard for back protectors). For commuting and street riding, the EVA back pad provides practical protection. If CE back certification is required — for example, for certain organised events or personal safety standards — the back pocket should be checked for compatibility with an aftermarket CE Level 1 or Level 2 back protector.
  • Asian sizing — what "size up" means in practice: The size tip notes this is Asian sizing and recommends choosing one size up for riders with a strong build or "small stomach." Asian sizing charts typically run 3–5cm smaller in chest and shoulder than Western equivalents at the same size label. The practical rule: if your chest circumference matches a size in this chart's Bust row, choose that size. If you are between sizes, choose the larger. If you normally wear a Western M riding jacket, check your chest measurement against the Bust row — a Western M (approx 100–104cm) maps to this jacket's S (109cm) or M (113cm) depending on your preferred fit snugness. The "strong build" note refers to muscular builds with wider shoulders and chests than the height/weight average for the size.
  • Full-body reflective — four surfaces and why that matters: Reflective material is positioned on the left sleeve, right sleeve, front, and back. A jacket with only a rear reflective panel is invisible to oncoming traffic; front-only is invisible to following traffic. Four-surface coverage ensures the rider is visible from all traffic approach angles simultaneously. The sleeve reflective material is particularly effective because arm movement produces periodic retroreflective flashes that attract attention more effectively than static panels. In rain — the primary low-visibility condition — road spray and mud coat reflective surfaces. Wipe the reflective panels after every wet ride to restore retroreflective performance.
  • Oxford + mesh zone logic and weight — 1.1kg for a 5-pad jacket: At 1.1kg jacket weight (1.5kg gross with packaging), the VJ-036 is light for a CE-padded riding jacket. This is achieved by using polyester mesh at the thermal panels (chest, back body, sleeve body) rather than solid fabric throughout. The Oxford cloth and Cordura reinforcement are limited to structural zones — shoulders, elbows, collar, and zip panel — where abrasion resistance is most needed. The mesh panels reduce both weight and material cost while maximising summer ventilation. The consequence is the same as all mesh jackets: no waterproofing at mesh zones and no wind blocking below approximately 12°C at those panels.
Four Key Advantages
⚙️
Wear-Resistant
Cordura Oxford at shoulder, elbow & collar
💨
Breathable
Mesh at chest, back & sleeve panels
🔆
Reflective
Sleeves + front + back — all angles
🛡️
CE Protection
CE shoulder ×2 + elbow ×2 + EVA back
Protection — What Is and Is Not CE Certified
CE Certified: Shoulder Pads ×2 + Elbow Pads ×2  |  Non-CE: EVA Foam Back Pad ×1 The four CE-certified pads (shoulder and elbow) meet European safety standard EN 13595 / EN 1621-1 for motorcycle protective clothing. CE certification means the pads have been independently tested to a defined impact force-transmission threshold. The specific CE Level (1 = ≤35kN average force; 2 = ≤20kN) is not stated — confirm with the seller before purchase if a specific level is required. The EVA foam back pad is not CE certified under EN 1621-2 — it provides practical impact cushioning at the thoracic spine but has not been independently tested to a defined force threshold. If CE back protection is required, check whether an aftermarket CE-certified back protector fits the jacket's back pocket before ordering.
Feature Performance
🧱
Oxford + Cordura + Mesh — Three Materials, Three Roles
The shell uses three materials across different zones. Oxford cloth (standard) forms the base outer at the jacket body. Cordura reinforcement is applied over or in place of standard Oxford at the highest-wear structural zones (shoulders, elbows, collar). Polyester mesh replaces Oxford at the thermal zones (chest, back body, sleeve panels) for ventilation. Each material is chosen for its zone's primary requirement: Cordura where abrasion resistance is critical, Oxford where structural form is needed, mesh where heat exit is the priority. In a fall, the Cordura zones at the shoulders and elbows are the first road-contact surfaces — these are the zones that must hold longest in a slide.
🔆
Reflective — Four Surfaces, Maintenance Requirement
Reflective fabric (woven retroreflective yarn or strip) is applied to both sleeves, the front body, and the back. This four-surface approach ensures the jacket is retroreflective to oncoming, following, and side-approaching traffic simultaneously — a single-face reflective jacket is invisible to traffic approaching from the unequipped angle. The sleeve retroreflective material produces motion-triggered flashes as the rider's arms move on the handlebar — more visually attention-catching than static back panel reflective at distance. Retroreflective woven fabric loses performance gradually with washing — wash inside-out and avoid high-temperature drying to preserve the reflective yarn's metallic coating.
🛡️
CE Shoulder + Elbow Pads — Alignment in Riding Posture
CE shoulder pads should be centred over the deltoid/acromion (lateral shoulder protrusion) in riding posture — not standing position. CE elbow pads should be centred over the olecranon (elbow tip) with the arm at handlebar width and angle. In a slim or regular-fit jacket, pad pockets are designed for the riding posture geometry; in a jacket that is too large, pads will shift downward from the target anatomy. After first fitting, sit in riding posture and apply pressure to each pad pocket — confirm each pad is correctly positioned over its target anatomy. A pad that is correctly placed standing but migrates in riding posture provides protection only where it sits, not where it should.
💨
Mesh Ventilation — Speed Threshold and Cold Limit
The polyester mesh panels at the chest, back, and sleeve body allow physical airflow through the jacket at riding speed. At speeds above approximately 40km/h, the pressure differential across the jacket body drives air volume through the mesh apertures — this is the primary cooling mechanism in summer. Below 20km/h (urban stop-start riding), the ventilation is largely passive and cooling benefit is minimal. At ambient temperatures below 12°C, the same airflow through mesh panels becomes a significant cold exposure factor. A thermal base layer worn beneath the jacket blocks cold airflow at the mesh zones — confirm whether the jacket fits comfortably over a base layer at your intended size before ordering.
⚖️
1.1kg Weight — How It Is Achieved
1.1kg for a jacket with five pads and structural Oxford/Cordura is achieved through the extensive use of polyester mesh at the non-structural panels. Mesh fabric weighs significantly less per square metre than woven Oxford or Cordura. The EVA back pad is also lighter than a CE-rated hard-shell back protector — this contributes to the low weight but is the reason the back pad is not CE certified (CE-rated back protectors typically use denser materials). If the back pad is replaced with an aftermarket CE Level 1 back protector, the jacket weight will increase by approximately 200–400g depending on the protector specification.
📐
Asian Sizing — Measurement-Based Selection
The size chart's Bust row (109cm S through 133cm 4XL) provides the most reliable sizing reference — match your body chest circumference directly to the Bust column. A Western M riding jacket typically fits a 100–104cm chest; this jacket's S (109cm bust) and M (113cm bust) are both generously sized for those dimensions. The "size up" advice applies most strongly to riders with broad shoulders (the Shoulder Width column scales 45.5cm S through 57.5cm 4XL — check this against your measured shoulder width) and to riders with muscular builds where chest measurement alone understates the required fit volume. Sleeve Length scales consistently 2cm per size (57.5cm S to 69.5cm 4XL) — taller riders should confirm sleeve length covers the wrist with gloves in place.
Size Guide — S to 4XL (Asian Sizing)
SML XLXXL3XL4XL
Measurement S M L XL XXL 3XL 4XL
Back Length (cm) 62 64 66 68 70 72 74
Bust (cm) 109 113 117 121 125 129 133
Shoulder Width (cm) 45.5 47.5 49.5 51.5 53.5 55.5 57.5
Sleeve Length (cm) 57.5 59.5 61.5 63.5 65.5 67.5 69.5
Asian sizing — use chest measurement as the primary reference. Match your body chest circumference to the Bust row. A Western M chest (100–104cm) corresponds approximately to S or M in this chart — do not rely on your usual Western size label. Shoulder Width scales 2cm per size (45.5–57.5cm) — check this column if you have broad shoulders. Sleeve Length scales consistently 2cm per size — confirm this covers your wrist with riding gloves. For a relaxed fit, broad build, or if between sizes, choose one size up. Tolerance ±1–2cm.
Package Contents
  • VEMAR VJ-035 (Black) / VJ-036 (Gray) Motorcycle Jacket × 1
  • CE Certified Shoulder Pads (CE level — confirm with seller) × 2
  • CE Certified Elbow Pads (CE level — confirm with seller) × 2
  • EVA Foam Back Protector (non-CE) × 1
Product Specifications
BrandVEMAR
ModelVJ-035 (Black) / VJ-036 (Gray) — identical construction
TypeSummer Breathable Motorcycle Riding Jacket
ShellCordura-Reinforced Oxford Cloth + Polyester Mesh + Reflective Fabric
Armor — 5 PcsCE Shoulder ×2 + CE Elbow ×2 (level confirm with seller) + EVA Back ×1 (non-CE)
FeaturesBreathable · Wear-Resistant · Full-Body Reflective · Anti-UV · Flame-Retardant
SizingAsian — size up from Western equivalent
SeasonSpring · Summer · Autumn (mesh — not Winter)
GenderUnisex
SizesS · M · L · XL · XXL · 3XL · 4XL
Jacket Weight1.1 kg
Gross Weight1.5 kg
Package31 × 26 × 11 cm
ApplicationMotorcycle / Motocross / Scooter / ATV / Street
Packaging & Delivery
1 Jacket
Selling unit
S – 4XL
Available sizes
1.1 kg
Jacket weight

VEMAR VJ-035 (Black) / VJ-036 (Gray) — summer breathable motorcycle jacket, S to 4XL. Cordura Oxford + polyester mesh, CE shoulder/elbow ×4, EVA back, full-body reflective. Asian sizing — use chest measurement, not Western size label. 1.1kg.

Buy Now ↗

FAQ

Many of our items meet the CE AAA standard—the highest level of safety certification for motorcycle apparel. Whether you’re cruising the streets, hitting the track, or powering through off-road terrain, Lane ProMotor gear is built to perform wherever the ride leads.

Once your order is on its way, you’ll receive your tracking number by email within 2–3 business days. Enter it on our Track Your Order page for live delivery updates. If it hasn’t come through after a week, check your spam or let us know and we’ll resend it.

Feel free to email us anytime at info@lanepromotor.com. Our support team is available Monday–Friday from 09:00 to 17:00 (Perth time, GMT+8). We aim to respond within 24 hours, excluding weekends and public holidays.

Please notify us immediately so we can correct the address before your order is dispatched. If the parcel is returned to us, a restocking or reshipment fee may apply. Be sure to double-check your address at checkout to avoid any delays.

All our gear is brand-new, in excellent, unworn condition. While minor storage marks may occasionally occur, every item is thoroughly inspected before we ship it out. Lane ProMotor delivers motorcycle equipment that won’t fade, crack or give in. From gloves and helmets to vests, pants, and custom race suits, each product is engineered to handle impact and endure tough riding conditions.

 

 

Returns & Exchanges Policy

At Lane ProMotor™, we are committed to providing riders with premium motorcycle gear, apparel, and accessories backed by excellent customer service. We understand that sometimes things do not work out, which is why we aim to make the return and exchange process as simple and hassle-free as possible.

30-Day Free Return Policy

Lane ProMotor™ offers a 30-day return policy, allowing you to request a return within 30 days of receiving your item.

To be eligible for a return, your item must:

  • Be unworn, unused, and in original condition
  • Include all original tags and packaging
  • Be accompanied by proof of purchase or order confirmation

To start a return, please contact us at 📧 info@lanepromotor.com.

Once your return request is approved, we will provide return instructions and the appropriate return address. Returns sent without prior approval will not be accepted.

How To Initiate A Return Or Exchange

To request a return or exchange, please follow these steps:

  • Contact our support team at info@lanepromotor.com
  • Provide your order number and reason for the return or exchange
  • Wait for approval and return instructions
  • Securely package your item in its original packaging
  • Ship the item according to the provided instructions

Please ensure your order number is included inside the parcel to avoid delays.

Damages & Issues

Please inspect your order immediately upon delivery.

If your item arrives damaged, defective, incorrect, or missing parts, please contact us as soon as possible at info@lanepromotor.com with:

  • Your order number
  • Photos of the item and packaging
  • A brief explanation of the issue

We will review the matter promptly and work to provide an appropriate resolution.

Exceptions / Non-Returnable Items

The following items are not eligible for return or exchange:

  • Sale or clearance items
  • Gift cards
  • Custom or personalised products
  • Perishable goods
  • Personal care products
  • Hazardous materials
  • Final sale items

If you are unsure whether your item qualifies for a return, please contact us before sending it back.

Return Shipping Costs

Domestic Returns (Australia)
Customers are responsible for return shipping costs unless the item arrived damaged, defective, or incorrect.

International Returns
International customers are responsible for all return shipping costs, customs duties, taxes, and associated return fees.

Exchanges
If an exchange is approved due to a sizing issue, damaged item, or incorrect product, Lane ProMotor™ may cover the shipping cost for sending the replacement item depending on the circumstance.

Exchanges

Need a different size, colour, or product?

The fastest way to receive a replacement item is to:

  • Submit a return request for the original item
  • Return the approved item
  • Place a new order for your preferred replacement product

If you require assistance with sizing or exchanges, our support team is happy to help.

Refunds

Once we receive and inspect your returned item, we will notify you regarding the approval status of your refund.

If approved:

  • Refunds will be issued to your original payment method
  • Processing generally takes 5–7 business days
  • Your bank or payment provider may require an additional 24–48 hours to process the refund

If more than 15 business days have passed since your refund was approved, please contact us at info@lanepromotor.com.

European Union – 14-Day Cooling-Off Period

For customers located in the European Union, you have the right to cancel or return your order within 14 days for any reason and without justification.

To qualify:

  • Items must be unused and in original condition
  • All tags and packaging must be included
  • Proof of purchase is required

Frequently Asked Questions (FAQ)

How long does it take to process my return?
Returns are usually processed within 5–7 business days after the returned item has been received and inspected.

Can sale items be returned?
Sale and clearance items are generally final sale unless faulty under applicable consumer laws.

Can I exchange for another size?
Yes. Please contact our support team before returning your item so we can assist you with the exchange process.

What if I entered the wrong shipping address?
Please contact us immediately. Once an order has been dispatched, address changes may no longer be possible.

Do you provide prepaid return labels?
Prepaid return labels may be provided for approved eligible returns depending on the situation.

Need Help?

If you have any questions regarding your order, return, exchange, or refund, please contact our support team:

📧 info@lanepromotor.com

Business Hours:
Monday – Friday, 9:00am – 5:00pm AWST

Lane ProMotor™ Support Team

 

 

Yes, we offer exchanges for unworn items that still have their original tags and packaging. Simply email us at info@lanepromotor.com and let us know which size or style you’d like.

Recently viewed

Your Cart

Your cart is currently empty.
Click here to continue shopping.